Call us 800-833-2343 or 518-434-3147

  • f
  • f
  • in
  • y

6 Item(s)

Set Ascending Direction
per page

Are You Getting Cracks & Fins on your Castings?

Monday, August 8, 2016 2:53:00 PM America/New_York

Technicians want longer working time with their investment. The answer...Read More
0 Comments | Posted in Elmer's FAQs By Elmer Rose CDT

It's All in the Mix

Monday, August 1, 2016 2:53:00 PM America/New_York

Gypsum products and investments must go through a chemical reaction during the mixing.Read More
0 Comments | Posted in Elmer's FAQs By Elmer Rose CDT

When in Doubt, Read the DFU!

Friday, July 22, 2016 2:53:00 PM America/New_York

Does this sound familiar? “I know what the consistency of the acrylic should be, I've been doing this for over 30 years now….”Read More
0 Comments | Posted in Elmer's FAQs By Elmer Rose CDT

Achieving Proper Fit

Sunday, May 1, 2016 2:53:00 PM America/New_York

Struggling with appliances that don’t fit properly? The final fit of the appliance is effected directly through its initial foundation, the master model.Read More
0 Comments | Posted in Elmer's FAQs By Elmer Rose CDT

Trouble Shootting RPD's

Saturday, April 16, 2016 2:53:00 PM America/New_York

I often have calls concerning ill-fitting partials. One of the areas overlooked when troubleshooting partials not fitting properly is dehydrating the refractory model. Often, we do not have the correct type of hardware for dehydration.Read More

Tags:

0 Comments | Posted in Elmer's FAQs By Elmer Rose CDT

Elmer's E.T.A.

Friday, April 1, 2016 1:35:00 AM America/New_York

Elmer started as a chair side assistant in the Navy and worked as a hygienist, laboratory technician, equipment specialist and instructor for RPD techniques with Nobilium. Prior to his semi-retirement from Nobilium, he was Director of Technical Services for more than 10 years for the company.Read More
0 Comments | Posted in Elmer's FAQs By Elmer Rose CDT

6 Item(s)

Set Ascending Direction
per page